Original file

Ferrari GTC 4 Lusso Bosch MED17.3.5 0261S18281 / 10SW022700

An original (stock) flash read of the Bosch MED17.3.5 control unit, fitted in Ferrari GTC 4 Lusso, hardware number 0261S18281 and software number 10SW022700, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ferrari GTC 4 Lusso6.3 petrol 690PS
Control unit
Bosch MED17.3.5
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S18281
Software number
10SW022700
Software / calibration
D1735E_10D6

Technical data

Vehicle
BrandFerrari
Car modelGTC 4 Lusso
Engine6.3 petrol 690PS
Power690PS / 507.5kW
Control unit
Control unitBosch MED17.3.5
ECU makerBosch
Hardware number0261S18281
Software number10SW022700
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key944b3d6338fb3864
Identification read from the file
ECU nameMED17.3.5
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software0261S18281 / 10SW022700Offset in the file: 0x3D1E6A / 0x02001A
Software / calibrationD1735E_10D6Offset in the file: 0x1FFF08
Bosch project identifier (EPK)30/1/MED17/69///D1735E_10D6///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.3.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S18281 and software number 10SW022700. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.3.5

HardwareSoftwareVehicles
0261S1130510SW030618Alfa Romeo Stelvio Quadrifoglio, Alfa Romeo Giulia, Alfa Romeo Stelvio
0261S1130510SW036072Alfa Romeo Giulia Quadrifoglio, Alfa Romeo Giulia Quadrofoglio MARCO CONFORTIN, Alfa Romeo Giulia
0261S1130510SW036559Alfa Romeo Giulia
0261S1130510SW056607Alfa Romeo Giulia
0261S1828110SW023133Ferrari F488 Spider
0261S1828110SW025502Ferrari 488
0261S1828110SW025932Ferrari 812 Superfast
0261S1828110SW028745Ferrari 488 GTB/Spider, Ferrari 488 GTB

Bosch MED17.3.5 original files

The Bosch MED17.3.5 unit page