Original file

Ferrari SF90 Bosch MED17.3.5 0261S21778 / 10SW077848

An original (stock) flash read of the Bosch MED17.3.5 control unit, fitted in Ferrari SF90, hardware number 0261S21778 and software number 10SW077848, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ferrari SF904.0 · 1000PS / 735.5kW
Control unit
Bosch MED17.3.5
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S21778
Software number
10SW077848
Software / calibration
D1735HH16D9

Technical data

Vehicle
BrandFerrari
Car modelSF90
Engine4.0
FuelPetrol
Power1000PS / 735.5kW
Control unit
Control unitBosch MED17.3.5
ECU makerBosch
Hardware number0261S21778
Software number10SW077848
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key31fecc92d8d4669a
Identification read from the file
ECU nameMED17.3.5
Read typeCalibration only (data set)
Bosch part / software0261S21778 / 10SW077848Offset in the file: 0x1FBE8C / 0x18001A
Software / calibrationD1735HH16D9Offset in the file: 0x1FBF08
Bosch project identifier (EPK)30/1/MED17/69///D1735HH16D9///Offset in the file: 0x1FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.3.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S21778 and software number 10SW077848. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.3.5

HardwareSoftwareVehicles
0261S2177810SW061441Ferrari F8 HEINZ MAPPACK
0261S2177810SW061449Ferrari F8 Tributo
0261S2177810SW061450Ferrari F8 Tributo / Spider
0261S2177810SW072676Ferrari F8 Tributo
0261S2177810SW080428Ferrari F8
0261S2177810SW081016Ferrari F8 Tributo
0261S2177810SW091790Ferrari
10375473691037547369Maserati Ghilbi 3.0 V6 Biturbo, Maserati Ghilbi S 3.0 V6 Biturbo, Maserati Quattroporte 3.0 V6 Biturbo

Bosch MED17.3.5 original files

The Bosch MED17.3.5 unit page