Original file

Peugeot 308 Bosch MED17.4.2 0089040261 / 10SW008904

An original (stock) flash read of the Bosch MED17.4.2 control unit, fitted in Peugeot 308, hardware number 0089040261 and software number 10SW008904, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 3081.6 · 156.0PS / 114.7kW
Control unit
Bosch MED17.4.2
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0089040261
Software number
10SW008904
Software / calibration
MED174_LL_G110C_22_0

Technical data

Vehicle
BrandPeugeot
Car model308
Engine1.6
FuelPetrol
Power156.0PS / 114.7kW
Control unit
Control unitBosch MED17.4.2
ECU makerBosch
Hardware number0089040261
Software number10SW008904
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2db2064962d9f0bb
Identification read from the file
ECU nameMED17.4.2
Read typeCalibration only (data set)
Bosch part / software10SW008904Offset in the file: 0x04001A
Software / calibrationMED174_LL_G110C_22_0Offset in the file: 0x0670EA

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.4.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0089040261 and software number 10SW008904. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.4.2

HardwareSoftwareVehicles
00617010541037512222Peugeot 308
00617011251037512222Peugeot RCZ
00617027351037521438Peugeot 408
007656026110SW007656Peugeot RCZ
009694026110SW009694Peugeot 308
018889018810SW018889Peugeot
0261S040101037392824Peugeot 207
0261S046161037500446Peugeot RCZ

Bosch MED17.4.2 original files

The Bosch MED17.4.2 unit page