Original file

Audi A3 1.8 TFSI Bosch MED17.5.1 8K1907115M / 1037503179

An original (stock) flash read of the Bosch MED17.5.1 control unit, fitted in Audi A3 1.8 TFSI, hardware number 8K1907115M and software number 1037503179, 12,288.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A3 1.8 TFSI1.8 petrol 160.0PS / 117.7kW
Control unit
Bosch MED17.5.1
Read type
Full read (boot area included)
File
12,288.00 KB · Flash
Hardware number
8K1907115M
Software number
1037503179
Vehicle maker's hardware number
8K1907115

Technical data

Vehicle
BrandAudi
Car modelA3 1.8 TFSI
Engine1.8 petrol 160.0PS / 117.7kW
Control unit
Control unitBosch MED17.5.1
ECU makerBosch
Hardware number8K1907115M
Software number1037503179
File
File typeOriginal flash read
File size12,288.00 KB (12,582,912 bytes)
File key55683706158b08b0
Identification read from the file
ECU nameMED17.5
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software1037503179Offset in the file: 0x99001A
Vehicle maker's hardware number8K1907115Offset in the file: 0x975532
Software / calibration8K1907115M · version 0001Offset in the file: 0x975560
Internal build stringMED17 CB.02.05.01Offset in the file: 0x91E290
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X52H_N08H13/Dst00//Offset in the file: 0x98FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K1907115M and software number 1037503179. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.1

HardwareSoftwareVehicles
03C9970321037390223Volkswagen pcmflash
03C997032A1037390225Volkswagen pcmflash
03C997032F1037396683Volkswagen pcmflash
03C997032H1037396749Volkswagen pcmflash
03C997032J1037399961Volkswagen pcmflash
03C997032K1037396754Volkswagen pcmflash
03C997032P1037399969Volkswagen pcmflash
03C997032R1037399971Volkswagen pcmflash

Bosch MED17.5.1 original files

The Bosch MED17.5.1 unit page