Original file

Volkswagen Passat Bosch MED17.5.2 0261S06014 / 1037533635

An original (stock) flash read of the Bosch MED17.5.2 control unit, fitted in Volkswagen Passat, hardware number 0261S06014 and software number 1037533635, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat2.0 petrol 199PS
Control unit
Bosch MED17.5.2
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S06014
Software number
1037533635
Vehicle maker's hardware number
06J907309B
Software / calibration
06J906027GP

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine2.0 petrol 199PS
Power199.9PS / 147.0kW
Control unit
Control unitBosch MED17.5.2
ECU makerBosch
Hardware number0261S06014
Software number1037533635
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8a193fbdff82da2a
Identification read from the file
ECU nameMED17.5.2
Read typeCalibration only (data set)
Bosch part / software0261S06014 / 1037533635Offset in the file: 0x1F1456 / 0x1C001A
Vehicle maker's hardware number06J907309BOffset in the file: 0x1F146C
Software / calibration06J906027GP · version 5696Offset in the file: 0x1F1478
Bosch project identifier (EPK)52/1/MED17/3/MED17.5.2//D1752V06C000_MY14C02/Dst00//Offset in the file: 0x1BFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S06014 and software number 1037533635. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.2

HardwareSoftwareVehicles
0261S060141037533049Volkswagen Passat
0261S060141037533053Volkswagen Passat
0261S060141037533148Volkswagen Passat
0261S060141037533445Volkswagen Passat CC / CC
0261S060141037533642Volkswagen Passat
0261S060141037534246Volkswagen Passat
0261S060141037542596Volkswagen Passat
0261S060141037542668Volkswagen Passat CC / CC 1.8, Volkswagen Passat 1.8 TFSI

Bosch MED17.5.2 original files

The Bosch MED17.5.2 unit page