Original file

Seat Ibiza 1.0 TSI 5MT - 95hp Bosch MED17.5.21 04C907309AE / 000430

An original (stock) flash read of the Bosch MED17.5.21 control unit, fitted in Seat Ibiza 1.0 TSI 5MT - 95hp, hardware number 04C907309AE and software number 000430, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Ibiza 1.0 TSI 5MT - 95hp1.0 petrol 95HP
Control unit
Bosch MED17.5.21
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
04C907309AE
Software number
000430
Bosch part / software
10SW000430
Software / calibration
04C906026Q

Technical data

Vehicle
BrandSeat
Car modelIbiza 1.0 TSI 5MT - 95hp
Engine1.0 petrol 95HP
Control unit
Control unitBosch MED17.5.21
ECU makerBosch
Hardware number04C907309AE
Software number000430
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc7938296c801fd0f
Identification read from the file
ECU nameMED17.5.21
Read typeFull read (boot area included)
Bosch part / software10SW000430Offset in the file: 0x1C001A
Vehicle maker's hardware number04C907309AEOffset in the file: 0x1F5C1A
Software / calibration04C906026Q · version 2307Offset in the file: 0x1F5C34
Bosch project identifier (EPK)38/1/MED17/3///D17521V31C002_M28I95///Offset in the file: 0x1BFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.21 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309AE and software number 000430. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.21

HardwareSoftwareVehicles
04C907309AD1037545593Volkswagen UP!
04C907309AD10SW017044Volkswagen UP!
04C907309AD10SW026833Volkswagen Up!
04C907309AD10SW030243Volkswagen Up!, Volkswagen UP!
04C907309AE010100Audi A1 1.0 TSI
04C907309AE010110Audi A1 1.0 TSI
04C907309AE011870Audi A3 1.0 TSI, Audi A3 1.0 TSI/TFSI, Audi A3 1.0 TSI 116 pk
04C907309AE011871Volkswagen Fabia 2 1.0 TSI, Volkswagen no Serie 1.0 TSI, Volkswagen Polo 1.0 TSI

Bosch MED17.5.21 original files

The Bosch MED17.5.21 unit page