Original file

Audi A3 Bosch MED17.5.21 04C907309AE / 10SW011870

An original (stock) flash read of the Bosch MED17.5.21 control unit, fitted in Audi A3, hardware number 04C907309AE and software number 10SW011870, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A31.0 petrol 115PS
Control unit
Bosch MED17.5.21
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
04C907309AE
Software number
10SW011870
Software / calibration
04C906026AB

Technical data

Vehicle
BrandAudi
Car modelA3
Engine1.0 petrol 115PS
Power115.0PS / 84.6kW
Control unit
Control unitBosch MED17.5.21
ECU makerBosch
Hardware number04C907309AE
Software number10SW011870
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keye4360284cfc99963
Identification read from the file
ECU nameMED17.5.21
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW011870Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309AEOffset in the file: 0x275B1E
Software / calibration04C906026AB · version 3494Offset in the file: 0x275B38
Internal build stringMED17 CB.08.06.03Offset in the file: 0x00F308
Bosch project identifier (EPK)38/1/MED17/3///D17521V31C002_M28IE0///Offset in the file: 0x23FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.21 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309AE and software number 10SW011870. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
SeatFlash4,096.00 KB€15Add to cart
Audi A3 - A3 BerlineFlash2,560.00 KB€15Add to cart
Audi 8V-FLFlash2,560.00 KB€15Add to cart
Audi A3Flash2,560.00 KB€15Add to cart
Audi A3Flash2,560.00 KB€15Add to cart
AudiFlash2,560.00 KB€15Add to cart

All reads of 04C907309AE / 10SW011870

Other pairs of Bosch MED17.5.21

HardwareSoftwareVehicles
04C907309AE10SW009784Škoda A3, Škoda Octavia 3, Škoda Octavia
04C907309AE10SW009902
04C907309AE10SW010025Volkswagen Polo
04C907309AE10SW011868Volkswagen Golf, Volkswagen Leon, Seat
04C907309AE10SW011871Seat Ibiza, Seat Fabia, Seat Rapid
04C907309AE10SW011872Seat Ibiza, Seat Fabia, Seat Polo
04C907309AE10SW011874Volkswagen
04C907309AE10SW011997Audi A1, Audi A1 Sportback

Bosch MED17.5.21 original files

The Bosch MED17.5.21 unit page