Original file

Volkswagen Polo Bosch MED17.5.21 04C907309AG / 04C907309AG

An original (stock) flash read of the Bosch MED17.5.21 control unit, fitted in Volkswagen Polo, hardware number 04C907309AG and software number 04C907309AG, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo1.0 petrol · 110.0PS / 80.9kW
Control unit
Bosch MED17.5.21
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
04C907309AG
Software number
04C907309AG
Bosch part / software
10SW078601
Software / calibration
04C906026CJ

Technical data

Vehicle
BrandVolkswagen
Car modelPolo
Engine1.0 petrol
Power110.0PS / 80.9kW
Control unit
Control unitBosch MED17.5.21
ECU makerBosch
Hardware number04C907309AG
Software number04C907309AG
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key4593a93afea3784c
Identification read from the file
ECU nameMED17.5.21
Read typeFull read (boot area included)
Bosch part / software10SW078601Offset in the file: 0x20001A
Vehicle maker's hardware number04C907309AGOffset in the file: 0x236D86
Software / calibration04C906026CJ · version 1621Offset in the file: 0x236DA0
Bosch project identifier (EPK)38/1/MED17/3///D17521V92C002_M29KG0///Offset in the file: 0x27FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.21 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309AG and software number 04C907309AG. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.21

HardwareSoftwareVehicles
04C907309AE10SW014370Volkswagen Golf
04C907309AE10SW014440Škoda Octavia, Škoda Octavia 3, Škoda Golf
04C907309AE10SW023812Volkswagen Golf, Volkswagen Leon, Seat
04C907309AE10SW023890Volkswagen Golf
04C907309AG10SW007460Volkswagen Caddy
04C907309AG10SW010854Volkswagen UP!
04C907309AG10SW078601Volkswagen
04C907309AG10SW078604Volkswagen

Bosch MED17.5.21 original files

The Bosch MED17.5.21 unit page