Original file

Volkswagen Polo Bosch MED17.5.21 04E907309D / 04E907309D

An original (stock) flash read of the Bosch MED17.5.21 control unit, fitted in Volkswagen Polo, hardware number 04E907309D and software number 04E907309D, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo1.4 petrol · 140.0PS / 103.0kW
Control unit
Bosch MED17.5.21
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E907309D
Software number
04E907309D
Bosch part / software
10SW008148
Software / calibration
04E906016R

Technical data

Vehicle
BrandVolkswagen
Car modelPolo
Engine1.4 petrol
Power140.0PS / 103.0kW
Control unit
Control unitBosch MED17.5.21
ECU makerBosch
Hardware number04E907309D
Software number04E907309D
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya9e05a2c31184f3a
Identification read from the file
ECU nameMED17.5.21
Read typeFull read (boot area included)
Bosch part / software10SW008148Offset in the file: 0x24001A
Vehicle maker's hardware number04E907309DOffset in the file: 0x2717C8
Software / calibration04E906016R · version 9215Offset in the file: 0x2717E2
Bosch project identifier (EPK)38/1/MED17/5///D17521V07C002_M24FF1///Offset in the file: 0x27FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.21 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309D and software number 04E907309D. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.21

HardwareSoftwareVehicles
04E907309C1037533785Audi
04E907309C1037552058Volkswagen A1, Audi
04E907309C1037552059Volkswagen
04E907309C10SW008911
04E907309D1037520852Volkswagen Polo
04E907309D1037532256
04E907309D1037533167Seat Leon, Seat Polo, Volkswagen
04E907309D1037533168Volkswagen Leon, Volkswagen Polo, Seat

Bosch MED17.5.21 original files

The Bosch MED17.5.21 unit page