Original file

Volkswagen pcmflash Bosch MED17.5.25 04E906027CE / 10SW000803

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Volkswagen pcmflash, hardware number 04E906027CE and software number 10SW000803, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash1.4 petrol 149PS
Control unit
Bosch MED17.5.25
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
04E906027CE
Software number
10SW000803
Vehicle maker's hardware number
04E907309AB

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Engine1.4 petrol 149PS
Power149.6PS / 110.0kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E906027CE
Software number10SW000803
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keycd1f71b71beb1b5b
Identification read from the file
ECU nameMED17.5.25
Read typeFull read (boot area included)
Bosch part / software10SW000803Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309ABOffset in the file: 0x279B66
Software / calibration04E906027CE · version 2341Offset in the file: 0x279B80
Bosch project identifier (EPK)38/1/MED17/3///D17525V21C001_M27B91///Offset in the file: 0x23FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E906027CE and software number 10SW000803. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E906027BT1037552669Volkswagen pcmflash
04E906027BT10SW007374Volkswagen pcmflash
04E906027CD10SW000807Volkswagen pcmflash
04E906027CD10SW007400Volkswagen pcmflash
04E906027CE10SW007401Volkswagen pcmflash
04E906027CH04E906027CHVolkswagen pcmflash
04E906027CH1037545390Volkswagen pcmflash
04E906027CH10SW008907Volkswagen pcmflash

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page