Original file

Škoda Superb Bosch MED17.5.25 04E906027EA / 04E906027EA

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Škoda Superb, hardware number 04E906027EA and software number 04E906027EA, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb1.4 petrol · 150.0PS / 110.3kW
Control unit
Bosch MED17.5.25
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E906027EA
Software number
04E906027EA
Bosch part / software
10SW007458
Vehicle maker's hardware number
04E907309P

Technical data

Vehicle
BrandŠkoda
Car modelSuperb
Engine1.4 petrol
Power150.0PS / 110.3kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E906027EA
Software number04E906027EA
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybe701d98aaa34098
Identification read from the file
ECU nameMED17.5.25
Read typeFull read (boot area included)
Bosch part / software10SW007458Offset in the file: 0x20001A
Vehicle maker's hardware number04E907309POffset in the file: 0x23A026
Software / calibration04E906027EA · version 2929Offset in the file: 0x23A040
Bosch project identifier (EPK)38/1/MED17/3///D17525V71C001_M29D21///Offset in the file: 0x27FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E906027EA and software number 04E906027EA. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E906027DM10SW011108Volkswagen pcmflash
04E906027DN10SW008912Volkswagen pcmflash
04E906027DP10SW009524Volkswagen pcmflash
04E906027DR10SW009511Volkswagen pcmflash
04E906027EA1037547309Škoda Superb 2
04E906027EF1037547292Volkswagen pcmflash
04E906027EF1037548600Volkswagen pcmflash
04E906027EF1037552098Volkswagen pcmflash

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page