Original file

Audi A1 Bosch MED17.5.25 04E907309AB / 10SW001093

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Audi A1, hardware number 04E907309AB and software number 10SW001093, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A11.4 petrol 150PS
Control unit
Bosch MED17.5.25
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
04E907309AB
Software number
10SW001093
Software / calibration
04E906027AT

Technical data

Vehicle
BrandAudi
Car modelA1
Engine1.4 petrol 150PS
Power150PS / 110.3kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E907309AB
Software number10SW001093
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key1bda6048c0e7e39d
Identification read from the file
ECU nameMED17.5.25
Read typeFull read (boot area included)
Bosch part / software10SW001093Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309ABOffset in the file: 0x279B66
Software / calibration04E906027AT · version 9073Offset in the file: 0x279B80
Internal build stringMED17 CB.04.05.00Offset in the file: 0x00EA72
Bosch project identifier (EPK)38/1/MED17/3///D17525V21C001_M27B91///Offset in the file: 0x23FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309AB and software number 10SW001093. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen PoloFlash4,096.00 KB€15Add to cart
SeatFlash4,096.00 KB€15Add to cart

All reads of 04E907309AB / 10SW001093

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E907309AB1037555172Seat
04E907309AB10SW000248Seat
04E907309AB10SW000805Volkswagen Passat
04E907309AB10SW000807Škoda Superb
04E907309AB10SW007370Volkswagen Polo, Volkswagen A3 2015y, Seat
04E907309AB10SW007374Volkswagen Passat, Volkswagen Passat / Magotan
04E907309AB10SW007400Škoda Superb, Volkswagen
04E907309AB10SW007401Audi A3 2015y

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page