Original file

Audi A3 2015y Bosch MED17.5.25 04E907309AB / 10SW007401

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Audi A3 2015y, hardware number 04E907309AB and software number 10SW007401, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A3 2015y1.4 petrol · 149.6PS / 110.0kW
Control unit
Bosch MED17.5.25
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
04E907309AB
Software number
10SW007401
Software / calibration
04E906027CE

Technical data

Vehicle
BrandAudi
Car modelA3 2015y
Engine1.4 petrol
Power149.6PS / 110.0kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E907309AB
Software number10SW007401
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
From the file nameAudi A3 1.4 TFSI 2015y
File key3f9196edd35fc254
Identification read from the file
ECU nameMED17.5.25
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW007401Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309ABOffset in the file: 0x279C4E
Software / calibration04E906027CE · version 2889Offset in the file: 0x279C68
Internal build stringMED17 CB.04.05.00Offset in the file: 0x00EA72
Bosch project identifier (EPK)38/1/MED17/3///D17525V21C001_M27B92///Offset in the file: 0x23FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309AB and software number 10SW007401. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
FlashFlash2,560.00 KB€15Add to cart
FlashFlash4,096.00 KB€15Add to cart

All reads of 04E907309AB / 10SW007401

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E907309AB10SW001093Audi A1, Audi Polo, Volkswagen
04E907309AB10SW007370Volkswagen Polo, Volkswagen A3 2015y, Seat
04E907309AB10SW007374Volkswagen Passat, Volkswagen Passat / Magotan
04E907309AB10SW007400Škoda Superb, Volkswagen
04E907309AB10SW008344Volkswagen
04E907309AB10SW008913Volkswagen Golf, Seat
04E907309AB10SW009102Seat Leon, Seat A4, Audi
04E907309AB1674933721Volkswagen

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page