Original file

Volkswagen Jetta / Lamando Bosch MED17.5.25 04E907309AE / 10SW007403

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Volkswagen Jetta / Lamando, hardware number 04E907309AE and software number 10SW007403, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Jetta / Lamando1.4 petrol 149PS
Control unit
Bosch MED17.5.25
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
04E907309AE
Software number
10SW007403
Software / calibration
04E906027AG

Technical data

Vehicle
BrandVolkswagen
Car modelJetta / Lamando
Engine1.4 petrol 149PS
Power149.6PS / 110.0kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E907309AE
Software number10SW007403
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keye7352ce555ab0832
Identification read from the file
ECU nameMED17.5.25
Read typeCalibration only (data set)
Bosch part / software10SW007403Offset in the file: 0x24001A
Vehicle maker's hardware number04E907309AEOffset in the file: 0x2799AE
Software / calibration04E906027AG · version 9179Offset in the file: 0x2799C8
Bosch project identifier (EPK)38/1/MED17/3///D17525V22C001_M27B92///Offset in the file: 0x23FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309AE and software number 10SW007403. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen New BeetleFlash2,560.00 KB€15Add to cart
VolkswagenFlash4,096.00 KB€15Add to cart

All reads of 04E907309AE / 10SW007403

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E907309AE1037553962Audi Q3
04E907309AE1037554021Volkswagen Scirocco, Volkswagen Scirocco 1.4 TSI
04E907309AE1037554294Volkswagen Golf 1.4 TSI
04E907309AE10SW001094Volkswagen Beetle
04E907309AE10SW007439Volkswagen
04E907309AE10SW009511Volkswagen
04E907309AE10SW009622Volkswagen Scirocco
04E907309AE10SW009643Volkswagen

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page