Original file

Volkswagen Polo Bosch MED17.5.25 04E907309AF / 04E906027BB

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Volkswagen Polo, hardware number 04E907309AF and software number 04E906027BB, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo1.2 petrol · 89.7PS / 66.0kW
Control unit
Bosch MED17.5.25
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
04E907309AF
Software number
04E906027BB
Bosch part / software
10SW003059

Technical data

Vehicle
BrandVolkswagen
Car modelPolo
Engine1.2 petrol
Power89.7PS / 66.0kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E907309AF
Software number04E906027BB
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key7ddf1d5dbb407501
Identification read from the file
ECU nameMED17.5.25
Read typeFull read (boot area included)
Bosch part / software10SW003059Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309AFOffset in the file: 0x26E9BC
Software / calibration04E906027BB · version 9085Offset in the file: 0x26E9D6
Internal build stringMED17 CB.04.05.00Offset in the file: 0x00EA72
Bosch project identifier (EPK)38/1/MED17/3///D17525V63C001_M26AE0///Offset in the file: 0x23FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309AF and software number 04E906027BB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E907309AF013386Škoda Fabia 2 1.2 TSI
04E907309AF014551Volkswagen Polo 1.2 TSI, Volkswagen Rapid 1.2 TSI, Škoda
04E907309AF014553Volkswagen no Serie 1.2 TSI
04E907309AF014667Volkswagen Polo 1.2 TSI
04E907309AF04E906027CHVolkswagen Golf 7
04E907309AF04E907309AFVolkswagen Fabia, Volkswagen 6R, Volkswagen Golf
04E907309AF1037535547Volkswagen Polo, Volkswagen Fabia 3, Volkswagen Fabia
04E907309AF1037540017Volkswagen 6R, Volkswagen Polo

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page