Original file

Volkswagen Polo 1.4 TSI Bosch MED17.5.25 04E907309BH / 10SW060929

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Volkswagen Polo 1.4 TSI, hardware number 04E907309BH and software number 10SW060929, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo 1.4 TSI1.4 petrol 125.0PS / 91.9kW
Control unit
Bosch MED17.5.25
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
04E907309BH
Software number
10SW060929
Software / calibration
04E906027NR

Technical data

Vehicle
BrandVolkswagen
Car modelPolo 1.4 TSI
Engine1.4 petrol 125.0PS / 91.9kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E907309BH
Software number10SW060929
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key2221c2b22c83083d
Identification read from the file
ECU nameMED17.5.25
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW060929Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309BHOffset in the file: 0x23C43A
Software / calibration04E906027NR · version 0668Offset in the file: 0x23C454
Internal build stringMED17 CB.04.06.00Offset in the file: 0x00EADA
Bosch project identifier (EPK)38/1/MED17/3///D17525V71C001_M29D4B///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309BH and software number 10SW060929. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E907309BH10SW030508Škoda Rapid 1.4 TSI, Seat
04E907309BH10SW036014Audi Q2
04E907309BH10SW039864Volkswagen
04E907309BH10SW049493Seat
04E907309BH1268100000Volkswagen Tiguan
04E907309BH1690278847Seat Leon
04E907309BJ000245Audi A3 1.4 TFSI
04E907309BJ003430Audi A3 1.4 TFSI, Audi A3, Audi Golf 1.4 TFSI

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page