Original file

Audi Q3 Bosch MED17.5.25 04E907309BK / 10SW013536

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Audi Q3, hardware number 04E907309BK and software number 10SW013536, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q3petrol · 150.0PS / 110.3kW
Control unit
Bosch MED17.5.25
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E907309BK
Software number
10SW013536
Software / calibration
04E906027KT

Technical data

Vehicle
BrandAudi
Car modelQ3
Enginepetrol
Displacement1.4
Power150.0PS / 110.3kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E907309BK
Software number10SW013536
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybdb3a19656ac3fb7
Identification read from the file
ECU nameMED17.5.25
Read typeFull read (boot area included)
Bosch part / software10SW013536Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309BKOffset in the file: 0x23A0FE
Software / calibration04E906027KT · version 3858Offset in the file: 0x23A118
Internal build stringMED17 CB.04.06.00Offset in the file: 0x00EADA
Bosch project identifier (EPK)38/1/MED17/3///D17525V72C001_M29D42///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309BK and software number 10SW013536. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q3Flash2,560.00 KB€15Add to cart
FlashFlash2,560.00 KB€15Add to cart

All reads of 04E907309BK / 10SW013536

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E907309BK10SW011139Volkswagen
04E907309BK10SW011143Volkswagen
04E907309BK10SW011145Volkswagen
04E907309BK10SW013535Volkswagen
04E907309BK10SW022610
04E907309BK10SW022611
04E907309BK10SW037820Audi Q3
04E907309BL000765Volkswagen Golf7 1.2 TSI, Volkswagen A3 1.2 TSI/TFSI, Volkswagen Golf 1.2 TFSI

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page