Original file

Volkswagen Bosch MED17.5.5 03C906016FB / 1037529930

An original (stock) flash read of the Bosch MED17.5.5 control unit, fitted in Volkswagen, hardware number 03C906016FB and software number 1037529930, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen1.4 petrol 130PS
Control unit
Bosch MED17.5.5
Read type
OBD read (no boot area)
File
1,504.00 KB · Flash
Hardware number
03C906016FB
Software number
1037529930
Software / calibration
03C906016GH

Technical data

Vehicle
BrandVolkswagen
Engine1.4 petrol 130PS
Power130.5PS / 96.0kW
Control unit
Control unitBosch MED17.5.5
ECU makerBosch
Hardware number03C906016FB
Software number1037529930
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key9da4d0f091bb8c74
Identification read from the file
ECU nameMED17.5.5
Read typeOBD read (no boot area)
Bosch part / software1037529930Offset in the file: 0x08001A
Vehicle maker's hardware number03C906016FBOffset in the file: 0x05E97C
Software / calibration03C906016GH · version 4587Offset in the file: 0x05E996
Internal build stringMED17 CB.03.05.04Offset in the file: 0x00DA8E
Bosch project identifier (EPK)46/1/MED17/3/D17553xN//D17553DN_M14P42/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03C906016FB and software number 1037529930. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.5

HardwareSoftwareVehicles
03C906016ES1037535637Volkswagen pcmflash
03C906016ET1037527963Volkswagen pcmflash
03C906016ET1037535404Volkswagen pcmflash
03C906016FB1037529923Volkswagen
03C906016FB1037529931Volkswagen Jetta
03C906016FB1037532950Volkswagen
03C906016FB1037535476Volkswagen
03C906016FB1037535494Volkswagen

Bosch MED17.5.5 original files

The Bosch MED17.5.5 unit page