Original file

Audi TT Bosch MED17.5 0261201948 / 1037398687

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Audi TT, hardware number 0261201948 and software number 1037398687, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi TT1.8 petrol 160PS
Control unit
Bosch MED17.5
Read type
Calibration only (data set)
File
1,504.00 KB · Flash
Hardware number
0261201948
Software number
1037398687
Vehicle maker's hardware number
8P0907115Q
Software / calibration
8J0907115K

Technical data

Vehicle
BrandAudi
Car modelTT
Engine1.8 petrol 160PS
Power160.4PS / 118.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number0261201948
Software number1037398687
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key7d84ccff51738b84
Identification read from the file
ECU nameMED17.5
Read typeCalibration only (data set)
Bosch part / software0261201948 / 1037398687Offset in the file: 0x0642D8 / 0x04001A
Vehicle maker's hardware number8P0907115QOffset in the file: 0x0642EE
Software / calibration8J0907115K · version 0070Offset in the file: 0x0642FA
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X56H_M08S15/Dst00//Offset in the file: 0x07FF0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261201948 and software number 1037398687. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi TTFlash256.00 KB€15Add to cart
Audi TTFlash1,504.00 KB€15Add to cart
Audi TTFlash1,504.00 KB€15Add to cart
Audi TT 1.8 TFSIFlash2,048.00 KB€15Add to cart
Audi TT Coupe 1.8 TFSI 6MT - 160hpFlash2,048.00 KB€15Add to cart
Audi TT 1.8TFSIFlash · From the file name: Audi TT 160PS2,048.00 KB€15Add to cart

All reads of 0261201948 / 1037398687

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
02612019161037392783Audi A3
02612019171037389477Seat Leon
02612019171037391147Seat A3, Seat Altea, Audi
02612019481037396767Audi TT, Audi TT Coupe 1.8 TFSI 6MT - 160hp, Audi TT 1.8 TFSI
02612019491037396604Volkswagen
02612019501037396605Volkswagen Passat 1.8 TFSI, Volkswagen Passat
02612019511037395040Volkswagen Scirocco, Volkswagen Scirocco 2.0 TFSI
02612019511037399563Volkswagen Scirocco, Volkswagen Scirocco 2.0TSI, Volkswagen Scirocco 2.0 TFSI

Bosch MED17.5 original files

The Bosch MED17.5 unit page