Original file

Audi A3 Bosch MED17.5 0261S04940 / 1037504595

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Audi A3, hardware number 0261S04940 and software number 1037504595, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A31.8 petrol · 160.4PS / 118.0kW
Control unit
Bosch MED17.5
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
0261S04940
Software number
1037504595
Vehicle maker's hardware number
8P0907115Q
Software / calibration
8P7907115K

Technical data

Vehicle
BrandAudi
Car modelA3
Engine1.8 petrol
Power160.4PS / 118.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number0261S04940
Software number1037504595
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keyd2aa8e7e643687c5
Identification read from the file
ECU nameMED17.5
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software0261S04940 / 1037504595Offset in the file: 0x067A08 / 0x08001A
Vehicle maker's hardware number8P0907115QOffset in the file: 0x067A1E
Software / calibration8P7907115K · version 0020Offset in the file: 0x067A2A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EEBA
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X56H_M09B60/Dst00//Offset in the file: 0x07FF0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S04940 and software number 1037504595. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A3Flash1,504.00 KB€15Add to cart
Audi A3Flash1,504.00 KB€15Add to cart
Audi A3Flash1,504.00 KB€15Add to cart
Audi A3Flash1,504.00 KB€15Add to cart
Audi A3Flash1,504.00 KB€15Add to cart
Audi A5Flash1,504.00 KB€15Add to cart
Audi A3Flash1,504.00 KB€15Add to cart
Audi A3 - A3 Berline 1.8 TFSIFlash3,072.00 KB€15Add to cart
Audi A3 1.8 TSI/TFSIFlash2,048.00 KB€15Add to cart
Audi A5 1.8 TFSIFlash3,072.00 KB€15Add to cart
Audi A3 1.8 TFSIFlash2,048.00 KB€15Add to cart

All reads of 0261S04940 / 1037504595

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
0261S049391037399448Audi A3, Audi A3 - A3 Berline 1.8 TFSI, Audi A3 Turbo Benzin 117.7KWKW
0261S049391037399902Audi A3, Audi A3 - A3 Berline 1.8 TFSI, Audi A3 1.8 TFSI
0261S049391037503713Audi A3, Audi A3 1.8 TSI/TFSI, Audi A3 Turbo Benzin 117.7KWKW
0261S04940001509Audi A3 - A3 Berline 1.8 TFSI, Audi A3 1.8 TFSI Quattro - 160hp
0261S049401037512899Audi A3, Audi A3 1.8 TFSI, Audi A3 1.8 TFSI S-Tronic - 160hp
0261S049401037522270Audi A3, Audi A3 1.8 TFSI - 160hp, Audi A3 1.8 TFSI
0261S0494010SW001509
0261S049411037400887Škoda New Octavia 1.8TSI

Bosch MED17.5 original files

The Bosch MED17.5 unit page