Original file

Bosch MED17.5 0261S04958 / 1037500494

An original (stock) flash read of the Bosch MED17.5 control unit, hardware number 0261S04958 and software number 1037500494, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Control unit
Bosch MED17.5
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
0261S04958
Software number
1037500494
Vehicle maker's hardware number
06J906026DA
Software / calibration
06J906026DR

Technical data

Vehicle
Engine2.0 petrol 199PS
Power199.9PS / 147.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number0261S04958
Software number1037500494
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
From the file name415
File key1c4aad24bc89ee1d
Identification read from the file
ECU nameMED17.5
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software0261S04958 / 1037500494Offset in the file: 0x064764 / 0x08001A
Vehicle maker's hardware number06J906026DAOffset in the file: 0x06477A
Software / calibration06J906026DR · version 4250Offset in the file: 0x064786
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FA26
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X35H_M14D31/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S04958 and software number 1037500494. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
0261S049561037545335Volkswagen
0261S049561037548566Volkswagen
0261S049571037507880Volkswagen Passat
0261S049571037526548Volkswagen
0261S049581037507884Volkswagen
0261S049591037501824Volkswagen Eos 2.0 TFSI
0261S049611037507885Volkswagen
0261S050091037507883Volkswagen

Bosch MED17.5 original files

The Bosch MED17.5 unit page