Original file

Seat Exeo Bosch MED17.5 0261S06017 / 1037513839

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Seat Exeo, hardware number 0261S06017 and software number 1037513839, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Exeo1.8 petrol · 119.6PS / 88.0kW
Control unit
Bosch MED17.5
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S06017
Software number
1037513839
Vehicle maker's hardware number
3R0907115D
Software / calibration
3R0907115C

Technical data

Vehicle
BrandSeat
Car modelExeo
Engine1.8 petrol
Power119.6PS / 88.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number0261S06017
Software number1037513839
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key69b6edf26222e3a7
Identification read from the file
ECU nameMED17.5
Read typeCalibration only (data set)
Bosch part / software0261S06017 / 1037513839Offset in the file: 0x066FC4 / 0x04001A
Vehicle maker's hardware number3R0907115DOffset in the file: 0x066FDA
Software / calibration3R0907115C · version 0020Offset in the file: 0x066FE6
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X5DH_M08A60/Dst00//Offset in the file: 0x07FF0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S06017 and software number 1037513839. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
SeatFlash2,048.00 KB€15Add to cart
Seat ExeoFlash1,504.00 KB€15Add to cart

All reads of 0261S06017 / 1037513839

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
0261S058981037502774Audi A3 2010 Turbo Benzin, Audi A3, Audi A3 / A3 Berline 2.0
0261S058981037510463Audi A3, Audi A3 2.0 TFSI, Audi A3 1.8 TSI/TFSI
0261S058991037509051Škoda Superb, Škoda Superb 2, Škoda superb
0261S060171037510684Seat Exeo, Seat Exeo Turbo Benzin 88.3KWKW
0261S060181037509800Seat Exeo
0261S060181037513840Seat Exeo, Seat Exeo 1.8TSI
0261S060181037527781Seat Exeo
0261S060641037505573Volkswagen TIGUAN

Bosch MED17.5 original files

The Bosch MED17.5 unit page