Original file

Audi A3 1.8 TFSI Bosch MED17.5 0261S07669 / 001501

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Audi A3 1.8 TFSI, hardware number 0261S07669 and software number 001501, 3,072.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A3 1.8 TFSI1.8 petrol 160.4PS / 118.0kW
Control unit
Bosch MED17.5
Read type
Full read (boot area included)
File
3,072.00 KB · Flash
Hardware number
0261S07669
Software number
001501
Bosch part / software
10SW001501
Vehicle maker's hardware number
1P0907115Q
Software / calibration
1P0907115AG

Technical data

Vehicle
BrandAudi
Car modelA3 1.8 TFSI
Engine1.8 petrol 160.4PS / 118.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number0261S07669
Software number001501
File
File typeOriginal flash read
File size3,072.00 KB (3,145,728 bytes)
File key44f10f3706a43029
Identification read from the file
ECU nameMED17.5
Read typeFull read (boot area included)
Bosch part / software0261S07669 / 10SW001501Offset in the file: 0x079760 / 0x09001A
Vehicle maker's hardware number1P0907115QOffset in the file: 0x079776
Software / calibration1P0907115AG · version 0040Offset in the file: 0x079782
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x01EEEA
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X56H_M09G30/Dst00//Offset in the file: 0x08FF0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S07669 and software number 001501. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat Altea 1.8 TFSIFlash2,048.00 KB€15Add to cart

All reads of 0261S07669 / 001501

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
0261S070631037555448Volkswagen Golf 6
0261S071061037522226Audi TT, Audi TT 1.8 TFSI
0261S071971037520935Seat Exeo
0261S071981037527785Seat Exeo ST
0261S076691037520826Seat Leon, Seat A4, Audi
0261S076691037525875Seat Leon, Seat Leon 1.8 TFSI
0261S0766910SW001501Seat
0261S076701037520824Škoda Yeti, Škoda Yeti 1.8 TSI, Škoda Superb 2

Bosch MED17.5 original files

The Bosch MED17.5 unit page