Original file

Seat Bosch MED17.5 0261S07669 / 10SW001501

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Seat, hardware number 0261S07669 and software number 10SW001501, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat1.8 petrol 160PS
Control unit
Bosch MED17.5
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S07669
Software number
10SW001501
Vehicle maker's hardware number
1P0907115Q
Software / calibration
1P0907115AG

Technical data

Vehicle
BrandSeat
Engine1.8 petrol 160PS
Power160.4PS / 118.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number0261S07669
Software number10SW001501
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3d833b71165895f7
Identification read from the file
ECU nameMED17.5
Read typeOBD read (no boot area)
Bosch part / software0261S07669 / 10SW001501Offset in the file: 0x069760 / 0x08001A
Vehicle maker's hardware number1P0907115QOffset in the file: 0x069776
Software / calibration1P0907115AG · version 0040Offset in the file: 0x069782
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EEEA
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X56H_M09G30/Dst00//Offset in the file: 0x07FF0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S07669 and software number 10SW001501. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
0261S071981037527785Seat Exeo ST
0261S07669001501Audi A3 1.8 TFSI, Audi Altea 1.8 TFSI, Seat
0261S076691037520826Seat Leon, Seat A4, Audi
0261S076691037525875Seat Leon, Seat Leon 1.8 TFSI
0261S076701037520824Škoda Yeti, Škoda Yeti 1.8 TSI, Škoda Superb 2
0261S076711037520825Volkswagen Golf
0261S076711037531978Volkswagen Golf, Volkswagen Golf 6 GTI 2.0 TSI, Volkswagen Golf 2.0 TSI GTI
0261S077201037522288

Bosch MED17.5 original files

The Bosch MED17.5 unit page