Original file

Volkswagen Bosch MED17.5 0261S08068 / 1037529903

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Volkswagen, hardware number 0261S08068 and software number 1037529903, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen160PS
Control unit
Bosch MED17.5
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S08068
Software number
1037529903
Vehicle maker's hardware number
06J906026DA
Software / calibration
06J906026GD

Technical data

Vehicle
BrandVolkswagen
Engine160PS
FuelPetrol
Displacement1.8
Power160.4PS / 118.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number0261S08068
Software number1037529903
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key892f07262c63eb98
Identification read from the file
ECU nameMED17.5
Read typeOBD read (no boot area)
Bosch part / software0261S08068 / 1037529903Offset in the file: 0x0650EE / 0x08001A
Vehicle maker's hardware number06J906026DAOffset in the file: 0x065104
Software / calibration06J906026GD · version 4801Offset in the file: 0x065110
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EEAA
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X37H_M14VE4/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S08068 and software number 1037529903. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
0261S078251037535902Škoda Yeti, Škoda Octavia
0261S078251037548554
0261S078251037551025
0261S079141037525226Volkswagen Jetta
0261S084981037533823Škoda Yeti, Škoda Yeti 1.8 TSI
0261S0849810SW008131Škoda Yeti 1.8 TSI, Škoda Yeti
0261S085001037533824Škoda Superb 2, Škoda Superb, Škoda Superb 2 1.8 TFSI
0261S085011037525784Škoda Superb 2

Bosch MED17.5 original files

The Bosch MED17.5 unit page