Original file

Seat Altea Bosch MED17.5 03C906016AP / 1037511598

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Seat Altea, hardware number 03C906016AP and software number 1037511598, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Altea1.4 · 122.0PS / 89.7kW
Control unit
Bosch MED17.5
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
03C906016AP
Software number
1037511598

Technical data

Vehicle
BrandSeat
Car modelAltea
Engine1.4
FuelPetrol
Power122.0PS / 89.7kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number03C906016AP
Software number1037511598
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keyce60ab7b7e7152d3
Identification read from the file
ECU nameMED17.5.5
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software1037511598Offset in the file: 0x08001A
Vehicle maker's hardware number03C906016APOffset in the file: 0x05D06A
Software / calibration03C906016AP · version 7461Offset in the file: 0x05D084
Internal build stringMED17 CB.03.05.04Offset in the file: 0x00DA5E
Bosch project identifier (EPK)46/1/MED17/3/D17553xN//D17553EN_M14LP4/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03C906016AP and software number 1037511598. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat LeonFlash · From the file name: Seat Leon 1.4 TSI 20112,048.00 KB€15Add to cart

All reads of 03C906016AP / 1037511598

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
0261S107611037551028Škoda Yeti, Škoda Octavia 2
0261S107681037543794Škoda Octavia
0261S109531037543795Volkswagen Scirocco
02816200001037533105Volkswagen Lamando, Volkswagen Jetta / Lamando
03C906016BG1037517736Audi A1, Audi A1 1.4 TSI, Audi A1 1.4 TSI/TFSI
03C906016BL1037511567Audi A3 / A3 Berline
03C906016GD1037529055Škoda Rapid
04C906057AP014565Seat Ibiza 1.0

Bosch MED17.5 original files

The Bosch MED17.5 unit page