Original file

Škoda Rapid Bosch MED17.5 03C906016GD / 1037529055

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Škoda Rapid, hardware number 03C906016GD and software number 1037529055, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Rapid1.4 petrol 122PS
Control unit
Bosch MED17.5
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
03C906016GD
Software number
1037529055

Technical data

Vehicle
BrandŠkoda
Car modelRapid
Engine1.4 petrol 122PS
Power122.4PS / 90.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number03C906016GD
Software number1037529055
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key074ec0bf5cbc3d23
Identification read from the file
ECU nameMED17.5.5
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software1037529055Offset in the file: 0x08001A
Vehicle maker's hardware number03C906016GDOffset in the file: 0x05E97C
Software / calibration03C906016GD · version 4583Offset in the file: 0x05E996
Internal build stringMED17 CB.03.05.04Offset in the file: 0x00DA8E
Bosch project identifier (EPK)46/1/MED17/3/D17553xN//D17553DN_M14P42/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03C906016GD and software number 1037529055. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
02816200001037533105Volkswagen Lamando, Volkswagen Jetta / Lamando
03C906016AP1037511598Seat Altea, Seat Leon
03C906016BG1037517736Audi A1, Audi A1 1.4 TSI, Audi A1 1.4 TSI/TFSI
03C906016BL1037511567Audi A3 / A3 Berline
04C906057AP014565Seat Ibiza 1.0
04C906057AP10SW014565Seat Ibiza
04C907309AL1037556817Seat Ateca, Seat Q2, Audi
04C907309AQ10SW035812Škoda Citigo

Bosch MED17.5 original files

The Bosch MED17.5 unit page