Original file

Volkswagen Polo Bosch MED17.5 04E907309DG / 04E907309DG

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Volkswagen Polo, hardware number 04E907309DG and software number 04E907309DG, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo1.5 · 110.0PS / 80.9kW
Control unit
Bosch MED17.5
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
04E907309DG
Software number
04E907309DG
Bosch part / software
10SW034645
Software / calibration
04E906057ER

Technical data

Vehicle
BrandVolkswagen
Car modelPolo
Engine1.5
FuelPetrol
Power110.0PS / 80.9kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number04E907309DG
Software number04E907309DG
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key42f34f97e7233f9c
Identification read from the file
ECU nameME17.5
Read typeFull read (boot area included)
ProcessorTC1724
Bosch part / software10SW034645Offset in the file: 0x04001A
Vehicle maker's hardware number04E907309DGOffset in the file: 0x03BCB0
Software / calibration04E906057ER · version 6030Offset in the file: 0x03BCCA
Internal build stringMED17 CB.04.02.03Offset in the file: 0x00F854
Bosch project identifier (EPK)38/1/MED17/3///S17522V57C000_M22I40///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309DG and software number 04E907309DG. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
04E906027HT1037550014Volkswagen pcmflash
04E907309AF04E906027LHVolkswagen Polo
04E907309BK010169Volkswagen Jetta 1.4 TSI
04E907309C1037543748Audi A1 1.4 TFSI
06J9060261037391697Volkswagen pcmflash
06J9060261037393905Volkswagen pcmflash
06J9060261037396601Volkswagen pcmflash
06J9060261037507890Volkswagen pcmflash

Bosch MED17.5 original files

The Bosch MED17.5 unit page