Original file

Volkswagen pcmflash Bosch MED17.5 06J997026J / 1037545335

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Volkswagen pcmflash, hardware number 06J997026J and software number 1037545335, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash2.0 petrol 199PS
Control unit
Bosch MED17.5
Read type
OBD read (no boot area)
File
1,504.00 KB · Flash
Hardware number
06J997026J
Software number
1037545335
Bosch part / software
0261S04956
Vehicle maker's hardware number
06J906026DA

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Engine2.0 petrol 199PS
Power199.9PS / 147.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number06J997026J
Software number1037545335
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key21b32a6a665564b7
Identification read from the file
ECU nameMED17.5
Read typeOBD read (no boot area)
Bosch part / software0261S04956 / 1037545335Offset in the file: 0x06481E / 0x08001A
Vehicle maker's hardware number06J906026DAOffset in the file: 0x064834
Software / calibration06J997026J · version 0398Offset in the file: 0x064840
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FA26
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X35H_M14DF1/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 06J997026J and software number 1037545335. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
06J997026E1037526550Volkswagen pcmflash
06J997026F1037533526Volkswagen pcmflash
06J997026G1037533533Volkswagen pcmflash
06J997026H1037545334Volkswagen pcmflash
06J997026K1037547389Volkswagen pcmflash
06J997026L1037547399Volkswagen pcmflash
06J997026M1037547400Volkswagen pcmflash
06J997026N10SW001510Volkswagen pcmflash

Bosch MED17.5 original files

The Bosch MED17.5 unit page