Original file

Seat pcmflash Bosch MED17.5 3R0907115D / 1037513840

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Seat pcmflash, hardware number 3R0907115D and software number 1037513840, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat pcmflash1.8 petrol 160PS
Control unit
Bosch MED17.5
Read type
OBD read (no boot area)
File
1,504.00 KB · Flash
Hardware number
3R0907115D
Software number
1037513840
Bosch part / software
0261S06018

Technical data

Vehicle
BrandSeat
Car modelpcmflash
Engine1.8 petrol 160PS
Power160.0PS / 117.7kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number3R0907115D
Software number1037513840
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
From the file name0030
File keyd9ab3821bda22911
Identification read from the file
ECU nameMED17.5
Read typeOBD read (no boot area)
Bosch part / software0261S06018 / 1037513840Offset in the file: 0x066FC4 / 0x08001A
Vehicle maker's hardware number3R0907115DOffset in the file: 0x066FDA
Software / calibration3R0907115D · version 0030Offset in the file: 0x066FE6
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EEEA
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X5DH_M08A60/Dst00//Offset in the file: 0x07FF0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 3R0907115D and software number 1037513840. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
1Z0907115F1037399516Volkswagen pcmflash
1Z0907115J1037399217Volkswagen pcmflash
3R0907115C1037513839Volkswagen pcmflash
3R0907115C1037527777Volkswagen pcmflash
3R0907115D1037527781Volkswagen pcmflash
3R0907115K1037527784Volkswagen pcmflash
3R0907115L1037527785Volkswagen pcmflash
3T09071151037399531Škoda pcmflash

Bosch MED17.5 original files

The Bosch MED17.5 unit page