Original file

Škoda pcmflash Bosch MED17.5 3T0907115G / 1037504594

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Škoda pcmflash, hardware number 3T0907115G and software number 1037504594, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda pcmflash1.8 petrol 160PS
Control unit
Bosch MED17.5
Read type
OBD read (no boot area)
File
1,504.00 KB · Flash
Hardware number
3T0907115G
Software number
1037504594
Bosch part / software
0261S05741
Vehicle maker's hardware number
1Z0907115F

Technical data

Vehicle
BrandŠkoda
Car modelpcmflash
Engine1.8 petrol 160PS
Power160.4PS / 118.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number3T0907115G
Software number1037504594
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keyc040e15ea9db8187
Identification read from the file
ECU nameMED17.5
Read typeOBD read (no boot area)
Bosch part / software0261S05741 / 1037504594Offset in the file: 0x067A08 / 0x08001A
Vehicle maker's hardware number1Z0907115FOffset in the file: 0x067A1E
Software / calibration3T0907115G · version 0010Offset in the file: 0x067A2A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EEBA
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X56H_M09B60/Dst00//Offset in the file: 0x07FF0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 3T0907115G and software number 1037504594. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
3T0907115B1037399579Volkswagen pcmflash
3T0907115F1037504578Škoda pcmflash
3T0907115F1037512296Škoda pcmflash
3T0907115F1037522297Škoda pcmflash
3T0907115G1037522314Škoda pcmflash
3T0907115G1037526724Škoda pcmflash
3T0907115H1037504579Volkswagen pcmflash
3T0907115H1037521147Škoda pcmflash

Bosch MED17.5 original files

The Bosch MED17.5 unit page