Original file

Škoda pcmflash Bosch MED17.5 5L0907115D / 1037516557

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Škoda pcmflash, hardware number 5L0907115D and software number 1037516557, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda pcmflash1.8 petrol 152PS
Control unit
Bosch MED17.5
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
5L0907115D
Software number
1037516557
Bosch part / software
0261S06544
Vehicle maker's hardware number
1Z0907115F

Technical data

Vehicle
BrandŠkoda
Car modelpcmflash
Engine1.8 petrol 152PS
Power152.3PS / 112.0kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number5L0907115D
Software number1037516557
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keyb85fda97cc112bb8
Identification read from the file
ECU nameMED17.5
Read typeFull read (boot area included)
Bosch part / software0261S06544 / 1037516557Offset in the file: 0x0697C8 / 0x08001A
Vehicle maker's hardware number1Z0907115FOffset in the file: 0x0697DE
Software / calibration5L0907115D · version 0010Offset in the file: 0x0697EA
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EEEA
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X56H_M09G20/Dst00//Offset in the file: 0x07FF0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 5L0907115D and software number 1037516557. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
5K09071151037510467Volkswagen pcmflash
5K0907115N1037539143Volkswagen pcmflash
5L0907115A1037505017Škoda pcmflash
5L0907115C1037514375Volkswagen pcmflash
5L0907115F1037548554Volkswagen pcmflash
5L0907115F1037551025Volkswagen pcmflash
5L0907115G1037533823Škoda pcmflash
5L0907115G10SW008131Škoda pcmflash

Bosch MED17.5 original files

The Bosch MED17.5 unit page