Original file

Audi A4 Bosch MED17.5 8K1907115F / 1037513784

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Audi A4, hardware number 8K1907115F and software number 1037513784, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A41.8 petrol 160PS
Control unit
Bosch MED17.5
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
8K1907115F
Software number
1037513784
Vehicle maker's hardware number
8K1907115

Technical data

Vehicle
BrandAudi
Car modelA4
Engine1.8 petrol 160PS
Power160.0PS / 117.7kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number8K1907115F
Software number1037513784
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keyb58d083d7887fdf2
Identification read from the file
ECU nameMED17.5
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software1037513784Offset in the file: 0x08001A
Vehicle maker's hardware number8K1907115Offset in the file: 0x065572
Software / calibration8K1907115F · version 0004Offset in the file: 0x0655A0
Internal build stringMED17 CB.02.05.01Offset in the file: 0x00E2C8
Bosch project identifier (EPK)45/1/MED17/5/MED17.5//D175X52H_N08H15/Dst00//Offset in the file: 0x07FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K1907115F and software number 1037513784. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A4Flash1,504.00 KB€15Add to cart
Audi A4 1.8 TSI/TFSIFlash3,072.00 KB€15Add to cart

All reads of 8K1907115F / 1037513784

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
8K1907115C1037509712Audi A4, Audi A4 1.8 TFSI, Audi A4 1.8 TSI/TFSI
8K1907115C1037512928Audi A4, Audi A4 1.8 TFSI, Audi A4 1.8 TSI/TFSI
8K1907115D1037398674Audi A4, Audi A4 1.8 TSI, Audi A3 1.8 TFSI
8K1907115F1037503669Audi A4 1.8 TSI/TFSI, Audi pcmflash, Audi A4
8K1907115G1037395026Audi A4
8K1907115G1037398173Audi pcmflash, Audi A4 1.8L, Volkswagen
8K1907115H1037394446Audi A4, Audi A4 1.8 TFSI (160) - 160hp, Audi A4 1.8 TFSI
8K1907115H1037398138Audi A4, Audi A4 1.8 TFSI (160) -, Audi A4 1.8 TFSI (160) Multitronic - 160hp

Bosch MED17.5 original files

The Bosch MED17.5 unit page