Original file

Audi pcmflash Bosch MED17.5 8P7907115G / 1037400847

An original (stock) flash read of the Bosch MED17.5 control unit, fitted in Audi pcmflash, hardware number 8P7907115G and software number 1037400847, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash1.8 petrol 158PS
Control unit
Bosch MED17.5
Read type
OBD read (no boot area)
File
1,504.00 KB · Flash
Hardware number
8P7907115G
Software number
1037400847
Bosch part / software
0261S04315
Vehicle maker's hardware number
8P1907115B

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine1.8 petrol 158PS
Power158.0PS / 116.2kW
Control unit
Control unitBosch MED17.5
ECU makerBosch
Hardware number8P7907115G
Software number1037400847
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key39e3f63450d39375
Identification read from the file
Read typeOBD read (no boot area)
Bosch part / software0261S04315 / 1037400847Offset in the file: 0x0623B0 / 0x08001A
Vehicle maker's hardware number8P1907115BOffset in the file: 0x0623C6
Software / calibration8P7907115G · version 0050Offset in the file: 0x0623D2
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00F8EE

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8P7907115G and software number 1037400847. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5

HardwareSoftwareVehicles
8P0907115Q1037396225Volkswagen pcmflash
8P7907115F1037399530Audi pcmflash
8P7907115G1037393967Volkswagen pcmflash
8P7907115G1037399215Volkswagen pcmflash
8P7907115K1037512899Audi pcmflash
8P7907115K1037522270Volkswagen pcmflash
8P7907115K10SW001509Audi pcmflash
8P7907115M1037521148Volkswagen pcmflash

Bosch MED17.5 original files

The Bosch MED17.5 unit page