Original file

Mercedes-Benz CLS500 Bosch MED17.7.1 0009040100 / 1037508406

An original (stock) flash read of the Bosch MED17.7.1 control unit, fitted in Mercedes-Benz CLS500, hardware number 0009040100 and software number 1037508406, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS5004.7 petrol 408PS
Control unit
Bosch MED17.7.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0009040100
Software number
1037508406
Bosch part / software
1037520757
Software / calibration
2789021100

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS500
Engine4.7 petrol 408PS
Power408.0PS / 300.1kW
Control unit
Control unitBosch MED17.7.1
ECU makerBosch
Hardware number0009040100
Software number1037508406
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key4dd19c664f88dcff
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037520757Offset in the file: 0x02001A
Software / calibration2789021100Offset in the file: 0x02020F
Data set number2789032400Offset in the file: 0x3E9C0E
Boot software0009040100Offset in the file: 0x00FC51
Internal build stringME177_9700D010_5.41;0 MOffset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0009040100 and software number 1037508406. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz CFlash4,096.00 KB€15Add to cart
Mercedes-Benz E350Flash4,096.00 KB€15Add to cart

All reads of 0009040100 / 1037508406

Other pairs of Bosch MED17.7.1

HardwareSoftwareVehicles
10SW011594Mercedes-Benz E, Mercedes-Benz E-Class
10SW020043Mercedes-Benz G
2769031302Mercedes-Benz GLK350
00000002271037508406Mercedes-Benz
00090403001037508406Mercedes-Benz CLS500, Mercedes-Benz C350, Mercedes-Benz CLS
00090403001037538060Mercedes-Benz CL500
00090403001037547273Mercedes-Benz C350
0261S064971037539112Mercedes-Benz S350

Bosch MED17.7.1 original files

The Bosch MED17.7.1 unit page