Original file

Mercedes-Benz CLA Bosch MED17.7.2 0000250910 / 1037526717

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz CLA, hardware number 0000250910 and software number 1037526717, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLA1.6 petrol 122PS
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0000250910
Software number
1037526717
Bosch part / software
10SW028917
Software / calibration
2709020201

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLA
Engine1.6 petrol 122PS
Power122.0PS / 89.7kW
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number0000250910
Software number1037526717
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5e5cab1b7287298c
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW028917Offset in the file: 0x02001A
Software / calibration2709020201Offset in the file: 0x02020F
Data set number2709031302Offset in the file: 0x3EB652
Boot software2709040700Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.70_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0000250910 and software number 1037526717. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
000000039710SW000397Mercedes-Benz SLK200
000000358010SW003580Mercedes-Benz A45
000000486710SW004867Mercedes-Benz A
00000284381037526717Mercedes-Benz E200
00005299821037529982Mercedes-Benz A200
00005355231037535523Mercedes-Benz A45
00005520631037526717Mercedes-Benz CLA180
00015436751037543675Mercedes-Benz A45

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page