Original file

Mercedes-Benz A45 Bosch MED17.7.2 0035800261 / 1037520801

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz A45, hardware number 0035800261 and software number 1037520801, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A452.0 · 360.0PS / 264.8kW
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0035800261
Software number
1037520801
Bosch part / software
10SW003580
Software / calibration
1339021300

Technical data

Vehicle
BrandMercedes-Benz
Car modelA45
Engine2.0
FuelPetrol
Power360.0PS / 264.8kW
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number0035800261
Software number1037520801
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key56ef3db7250a181d
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW003580Offset in the file: 0x02001A
Software / calibration1339021300Offset in the file: 0x02020F
Data set number1339031900Offset in the file: 0x3F528E
Boot software2709040100Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.60_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0035800261 and software number 1037520801. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
00005520631037526717Mercedes-Benz CLA180
00015436751037543675Mercedes-Benz A45
00015511711037551171Mercedes-Benz A45
000781026110SW000781Mercedes-Benz C200
00486702611037526717Mercedes-Benz A45
005625026110SW005625Mercedes-Benz CLA180
006856026110SW006856Mercedes-Benz C200
006858026110SW006858Mercedes-Benz C200

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page