Original file

Mercedes-Benz A250 Bosch MED17.7.2 0104556860 / 1037526717

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz A250, hardware number 0104556860 and software number 1037526717, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A2502.0 petrol 211PS
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0104556860
Software number
1037526717
Bosch part / software
1037556875
Software / calibration
2709028800

Technical data

Vehicle
BrandMercedes-Benz
Car modelA250
Engine2.0 petrol 211PS
Power211.0PS / 155.2kW
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number0104556860
Software number1037526717
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydd044732824981b2
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037556875Offset in the file: 0x02001A
Software / calibration2709028800Offset in the file: 0x02020F
Data set number2709037401Offset in the file: 0x3F1558
Boot software2709040700Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.70_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0104556860 and software number 1037526717. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
00486702611037526717Mercedes-Benz A45
005625026110SW005625Mercedes-Benz CLA180
006856026110SW006856Mercedes-Benz C200
006858026110SW006858Mercedes-Benz C200
013688026110SW013688Mercedes-Benz C180
014610026110SW014610Mercedes-Benz CLA180
014613026110SW014613Mercedes-Benz CLA250
01658502091037526717Mercedes-Benz

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page