Original file

Mercedes-Benz A 180 Bosch MED17.7.2 2709026500 / 1037526717

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz A 180, hardware number 2709026500 and software number 1037526717, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A 180petrol 122.0PS / 89.7kW
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2709026500
Software number
1037526717
Bosch part / software
1037541567

Technical data

Vehicle
BrandMercedes-Benz
Car modelA 180
Enginepetrol 122.0PS / 89.7kW
Displacement1.6
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number2709026500
Software number1037526717
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2591663936bae2e2
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037541567Offset in the file: 0x02001A
Software / calibration2709026500Offset in the file: 0x02020F
Data set number2709033401Offset in the file: 0x3E6812
Boot software2709040700Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.70_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2709026500 and software number 1037526717. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
2649024200039623Mercedes-Benz C200, Mercedes-Benz GLE350
26490263002649032703Mercedes-Benz E200
27090208001037508488Mercedes-Benz B180
27090264001037520801Mercedes-Benz E 250, Mercedes-Benz E 200, Mercedes-Benz E250
27090280001037520801Mercedes-Benz A250
27090285001037526717Mercedes-Benz CLA180 1.6
27090289001037520801Mercedes-Benz CLA
27090293001037526717Mercedes-Benz A

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page