Original file

Mercedes-Benz E200 SCHMIDDI Bosch MED17.7.2 2709040300 / 009083

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz E200 SCHMIDDI, hardware number 2709040300 and software number 009083, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E200 SCHMIDDI2.0 · 184.0PS / 135.3kW
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2709040300
Software number
009083
Bosch part / software
10SW009083
Software / calibration
2749024200

Technical data

Vehicle
BrandMercedes-Benz
Car modelE200 SCHMIDDI
Engine2.0
Power184.0PS / 135.3kW
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number2709040300
Software number009083
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd48ebb22d0145a8e
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW009083Offset in the file: 0x38001A
Software / calibration2749024200Offset in the file: 0x02020F
Data set number2749032103Offset in the file: 0x3E0CD8
Boot software2709040300Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.70;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2709040300 and software number 009083. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
27090293001037526717Mercedes-Benz A
27090313022709031302Mercedes-Benz A 160
27090329011037533514Mercedes-Benz A
27090401001037520801Mercedes-Benz A45, Mercedes-Benz CLA180, Mercedes-Benz SLC
27090407001037520801Mercedes-Benz CLA180, Mercedes-Benz A200, Mercedes-Benz A250
27090407001037526717Mercedes-Benz A45, Mercedes-Benz C200, Mercedes-Benz E200
27090407001037556783Mercedes-Benz CLA180
27490224001037526717Mercedes-Benz C

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page