Original file

Mercedes-Benz A250 Bosch MED17.7.2 2709040700 / 1037520801

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz A250, hardware number 2709040700 and software number 1037520801, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A2502.0 · 211.0PS / 155.2kW
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2709040700
Software number
1037520801
Bosch part / software
10SW005592
Software / calibration
2709029000

Technical data

Vehicle
BrandMercedes-Benz
Car modelA250
Engine2.0
FuelPetrol
Power211.0PS / 155.2kW
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number2709040700
Software number1037520801
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key97c9aa4e9b171a72
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW005592Offset in the file: 0x02001A
Software / calibration2709029000Offset in the file: 0x02020F
Data set number2709037901Offset in the file: 0x3F17E2
Boot software2709040700Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.70_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2709040700 and software number 1037520801. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz A200Flash4,096.00 KB€15Add to cart
Mercedes-Benz CLA180Flash4,096.00 KB€15Add to cart
Mercedes-Benz A200 DYNO CHIPTUNINGFILESFlash4,096.00 KB€15Add to cart
Mercedes-Benz CLA200Flash4,096.00 KB€15Add to cart
Mercedes-Benz B180Flash4,096.00 KB€15Add to cart
Mercedes-Benz CLA180Flash4,096.00 KB€15Add to cart

All reads of 2709040700 / 1037520801

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
27090313022709031302Mercedes-Benz A 160
27090329011037533514Mercedes-Benz A
27090401001037520801Mercedes-Benz A45, Mercedes-Benz CLA180, Mercedes-Benz SLC
2709040300009083Mercedes-Benz E200 SCHMIDDI
27090407001037526717Mercedes-Benz A45, Mercedes-Benz C200, Mercedes-Benz E200
27090407001037556783Mercedes-Benz CLA180
27490224001037526717Mercedes-Benz C
27490231011037526717Mercedes-Benz E200 2.0T

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page