Original file

Mercedes-Benz CLA180 Bosch MED17.7.2 2709040700 / 1037556783

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz CLA180, hardware number 2709040700 and software number 1037556783, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLA180diesel · 122PS
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2709040700
Software number
1037556783
Software / calibration
2709028700

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLA180
Enginediesel
Power122PS
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number2709040700
Software number1037556783
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyde847f4fd67e7630
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037556783Offset in the file: 0x02001A
Software / calibration2709028700Offset in the file: 0x02020F
Data set number2709037301Offset in the file: 0x3E72D6
Boot software2709040700Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.70_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2709040700 and software number 1037556783. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
27090401001037520801Mercedes-Benz A45, Mercedes-Benz CLA180, Mercedes-Benz SLC
2709040300009083Mercedes-Benz E200 SCHMIDDI
27090407001037520801Mercedes-Benz CLA180, Mercedes-Benz A200, Mercedes-Benz A250
27090407001037526717Mercedes-Benz A45, Mercedes-Benz C200, Mercedes-Benz E200
27490224001037526717Mercedes-Benz C
27490231011037526717Mercedes-Benz E200 2.0T
27490238011037526717Mercedes-Benz C160
27490267011037520801Mercedes-Benz SLC300

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page