Original file

Mercedes-Benz A45 Bosch MED17.7.2 4A38120BS0H0000 / 1037520801

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz A45, hardware number 4A38120BS0H0000 and software number 1037520801, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A452.0 · 360.0PS / 264.8kW
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4A38120BS0H0000
Software number
1037520801
Bosch part / software
1037537976
Software / calibration
1339020700

Technical data

Vehicle
BrandMercedes-Benz
Car modelA45
Engine2.0
FuelPetrol
Power360.0PS / 264.8kW
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number4A38120BS0H0000
Software number1037520801
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0ca6fd9f1c86f03e
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037537976Offset in the file: 0x02001A
Software / calibration1339020700Offset in the file: 0x02020F
Data set number1339030800Offset in the file: 0x3FB4C4
Boot software2709040100Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.60_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4A38120BS0H0000 and software number 1037520801. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
274903010610SW083351Mercedes-Benz C200
274903550410SW030120Mercedes-Benz E
27490402001037534070Infiniti Q50
4A38100BS0H00011037536459Mercedes-Benz CLA
4A38120BS0H00001037537976Mercedes-Benz A45
4A40050BS0H00011037520801Mercedes-Benz A, Mercedes-Benz CLA
4A40050BS0H00011037543675Mercedes-Benz CLA
4A40070BS0H00001037547085Mercedes-Benz A45

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page