Original file

Mercedes-Benz A180 Bosch MED17.7.2 4D35370E53H0000 / 1037508488

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz A180, hardware number 4D35370E53H0000 and software number 1037508488, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A1801.6 diesel 122PS
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4D35370E53H0000
Software number
1037508488
Bosch part / software
1037529040
Software / calibration
2709020800

Technical data

Vehicle
BrandMercedes-Benz
Car modelA180
Engine1.6 diesel 122PS
Power122.0PS / 89.7kW
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number4D35370E53H0000
Software number1037508488
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key36c8180100759018
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037529040Offset in the file: 0x02001A
Software / calibration2709020800Offset in the file: 0x00FC51
Data set number2709031501Offset in the file: 0x3E6A8E
Internal build stringME177_9700D010_6.40;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4D35370E53H0000 and software number 1037508488. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
4A40090BS0H000010SW003580Mercedes-Benz CLA
4A42110CS0H00001339032100Mercedes-Benz GLA 45AMG
4A42110CS0H0001012062Mercedes-Benz A45
4A42110CS0H00011037526717Mercedes-Benz A45
4D35390F53H00001037508488Mercedes-Benz B
4D40110H57H00011037538119Mercedes-Benz CLA
4D41070H57S00001037520801Mercedes-Benz CLA 250
4D41B40H5RH00001037552408Mercedes-Benz GLA250

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page