Original file

Mercedes-Benz A180 Bosch MED17.7.2 4N38250E57H0000 / 1037520801

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz A180, hardware number 4N38250E57H0000 and software number 1037520801, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A1801.8 petrol 122PS
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4N38250E57H0000
Software number
1037520801
Bosch part / software
1037529982
Software / calibration
2709021700

Technical data

Vehicle
BrandMercedes-Benz
Car modelA180
Engine1.8 petrol 122PS
Power122.0PS / 89.7kW
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number4N38250E57H0000
Software number1037520801
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc7bf89d18413cfeb
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037529982Offset in the file: 0x02001A
Software / calibration2709021700Offset in the file: 0x02020F
Data set number2709033600Offset in the file: 0x3F682E
Boot software2709040100Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.60_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4N38250E57H0000 and software number 1037520801. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
4D41BD0H57H00011037526717Mercedes-Benz CLA 250
4D41DG0H57H0000028918Mercedes-Benz A250
4J462H0T5TH000010SW026626Mercedes-Benz E
4L52060T5YH000310SW059370Mercedes-Benz GLC
4N38250E57H00001037529983Mercedes-Benz A180
4N40110F57H00001037520801Mercedes-Benz A180
4N41DG0F57H0000028917Mercedes-Benz C180
4S45520T5NS00001037526717Mercedes-Benz C

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page