Original file

Mercedes-Benz E400 400 CGI Bosch MED17.7.3.1 0009041000 / 1037528541

An original (stock) flash read of the Bosch MED17.7.3.1 control unit, fitted in Mercedes-Benz E400 400 CGI, hardware number 0009041000 and software number 1037528541, 6,144.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E400 400 CGIpetrol 333.0PS / 244.9kW
Control unit
Bosch MED17.7.3.1
Read type
Full read (boot area included)
File
6,144.00 KB · Flash
Hardware number
0009041000
Software number
1037528541
Bosch part / software
10SW011112
Software / calibration
2769029400

Technical data

Vehicle
BrandMercedes-Benz
Car modelE400 400 CGI
Enginepetrol 333.0PS / 244.9kW
Control unit
Control unitBosch MED17.7.3.1
ECU makerBosch
Hardware number0009041000
Software number1037528541
File
File typeOriginal flash read
File size6,144.00 KB (6,291,456 bytes)
File key3ddd9d55d42bcdf7
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW011112Offset in the file: 0x02001A
Software / calibration2769029400Offset in the file: 0x020213
Data set number2769037502Offset in the file: 0x49DE16
Boot software0009041000Offset in the file: 0x00FC4D
Internal build string001_1.4.00_CFG09;0 DESLA ExtFlash HWBdrtOffset in the file: 0x00FC24

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.3.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0009041000 and software number 1037528541. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

All reads of 0009041000 / 1037528541

Other pairs of Bosch MED17.7.3.1

HardwareSoftwareVehicles
2769036203Mercedes-Benz C400
2769037703Mercedes-Benz E400
2769038603Mercedes-Benz E43 AMG
2769039903Mercedes-Benz GLC 43AMG
00090410001037551953Mercedes-Benz C
000904100010SW030123Mercedes-Benz C400
000904100010SW042094Mercedes-Benz S
000904100010SW045845Mercedes-Benz C

Bosch MED17.7.3.1 original files

The Bosch MED17.7.3.1 unit page