Original file

Mercedes-Benz GLE Bosch MED17.7.3.1 0202018923 / 1037528541

An original (stock) flash read of the Bosch MED17.7.3.1 control unit, fitted in Mercedes-Benz GLE, hardware number 0202018923 and software number 1037528541, 6,144.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLE3.0 petrol 333PS
Control unit
Bosch MED17.7.3.1
Read type
Full read (boot area included)
File
6,144.00 KB · Flash
Hardware number
0202018923
Software number
1037528541
Bosch part / software
10SW016317
Software / calibration
2769028300

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE
Engine3.0 petrol 333PS
Power333PS / 245kW
Control unit
Control unitBosch MED17.7.3.1
ECU makerBosch
Hardware number0202018923
Software number1037528541
File
File typeOriginal flash read
File size6,144.00 KB (6,291,456 bytes)
File key98db1b62f7f52c3f
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW016317Offset in the file: 0x02001A
Software / calibration2769028300Offset in the file: 0x020213
Data set number2769039902Offset in the file: 0x4A4972
Boot software0009041000Offset in the file: 0x00FC4D
Internal build string001_1.4.00_CFG09;0 DESLA ExtFlash HWBdrtOffset in the file: 0x00FC24

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.3.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0202018923 and software number 1037528541. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.3.1

HardwareSoftwareVehicles
010706026110SW010706Mercedes-Benz SLC
011120026110SW011120Mercedes-Benz GLE
0134689025092Mercedes-Benz GLE
0134689038676Mercedes-Benz C43
0261S085651037528541Mercedes-Benz SLC
0261S0856510SW018058Mercedes-Benz GLE
0261S085661037528541Mercedes-Benz E
0261S085661037546889Mercedes-Benz C400

Bosch MED17.7.3.1 original files

The Bosch MED17.7.3.1 unit page