Original file

Mercedes-Benz GLE450 Bosch MED17.7.3.1 2769027000 / 1037528541

An original (stock) flash read of the Bosch MED17.7.3.1 control unit, fitted in Mercedes-Benz GLE450, hardware number 2769027000 and software number 1037528541, 6,144.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLE4503.0 · 367.0PS / 269.9kW
Control unit
Bosch MED17.7.3.1
Read type
Full read (boot area included)
File
6,144.00 KB · Flash
Hardware number
2769027000
Software number
1037528541
Bosch part / software
1037556712

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE450
Engine3.0
FuelPetrol
Power367.0PS / 269.9kW
Control unit
Control unitBosch MED17.7.3.1
ECU makerBosch
Hardware number2769027000
Software number1037528541
File
File typeOriginal flash read
File size6,144.00 KB (6,291,456 bytes)
File key3bd9df8f29305caa
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037556712Offset in the file: 0x02001A
Software / calibration2769027000Offset in the file: 0x020213
Data set number2769033203Offset in the file: 0x49B5E0
Boot software0009041000Offset in the file: 0x00FC4D
Internal build string001_1.4.00_CFG09;0 DESLA ExtFlash HWBdrtOffset in the file: 0x00FC24

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.3.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2769027000 and software number 1037528541. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.3.1

HardwareSoftwareVehicles
27690261011037528541Mercedes-Benz GLE400
27690265011037528541Mercedes-Benz C 43 AMG
27690266001037528541Mercedes-Benz C43 AMG
27690269001037528541Mercedes-Benz GLE500e
27690281011037528541Mercedes-Benz GLC
27690297001037528541Mercedes-Benz GLE400
27690299001037528541Mercedes-Benz S320
2769030504038676Mercedes-Benz C43

Bosch MED17.7.3.1 original files

The Bosch MED17.7.3.1 unit page