Original file

Mercedes-Benz GLC Bosch MED17.7.3.1 2769028101 / 1037528541

An original (stock) flash read of the Bosch MED17.7.3.1 control unit, fitted in Mercedes-Benz GLC, hardware number 2769028101 and software number 1037528541, 6,144.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC3.0 · 390.0PS / 286.8kW
Control unit
Bosch MED17.7.3.1
Read type
Full read (boot area included)
File
6,144.00 KB · Flash
Hardware number
2769028101
Software number
1037528541
Bosch part / software
10SW065253

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC
Engine3.0
FuelPetrol
Power390.0PS / 286.8kW
Control unit
Control unitBosch MED17.7.3.1
ECU makerBosch
Hardware number2769028101
Software number1037528541
File
File typeOriginal flash read
File size6,144.00 KB (6,291,456 bytes)
File keyd4c4f12ae0f8ad92
Identification read from the file
ECU nameMED17.7.3
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW065253Offset in the file: 0x02001A
Software / calibration2769028101Offset in the file: 0x020213
Data set number2769038904Offset in the file: 0x4BA707
Boot software0009041000Offset in the file: 0x00FC4D
Internal build string001_1.4.00_CFG09;0 DESLA ExtFlash HWBdrtOffset in the file: 0x00FC24

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.3.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2769028101 and software number 1037528541. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.3.1

HardwareSoftwareVehicles
27690265011037528541Mercedes-Benz C 43 AMG
27690266001037528541Mercedes-Benz C43 AMG
27690269001037528541Mercedes-Benz GLE500e
27690270001037528541Mercedes-Benz GLE450
27690297001037528541Mercedes-Benz GLE400
27690299001037528541Mercedes-Benz S320
2769030504038676Mercedes-Benz C43
27690346032769034603Mercedes-Benz E 43 AMG

Bosch MED17.7.3.1 original files

The Bosch MED17.7.3.1 unit page