Original file

Mercedes-Benz GL450 Bosch MED17.7.3.1 2789021800 / 1037521144

An original (stock) flash read of the Bosch MED17.7.3.1 control unit, fitted in Mercedes-Benz GL450, hardware number 2789021800 and software number 1037521144, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GL4504.7
Control unit
Bosch MED17.7.3.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2789021800
Software number
1037521144
Bosch part / software
1037530074

Technical data

Vehicle
BrandMercedes-Benz
Car modelGL450
Engine4.7
FuelPetrol
Control unit
Control unitBosch MED17.7.3.1
ECU makerBosch
Hardware number2789021800
Software number1037521144
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key94834c0a56fe12b0
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037530074Offset in the file: 0x02001A
Software / calibration2789021800Offset in the file: 0x02020F
Data set number2789033900Offset in the file: 0x3F5FFA
Boot software0009040300Offset in the file: 0x00FC51
Internal build stringME177_9700D010_5.60;0 MOffset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.3.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2789021800 and software number 1037521144. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.3.1

HardwareSoftwareVehicles
2769030504038676Mercedes-Benz C43
27690346032769034603Mercedes-Benz E 43 AMG
276903880310SW034648Mercedes-Benz C
27890211001037508406Mercedes-Benz CLS500, Mercedes-Benz CLS 500
6B46300N83T000210SW025770Mercedes-Benz SL
6E46560N83CT001034648Mercedes-Benz C43
6J49510Q83WT0022769038603Mercedes-Benz E43 AMG
6J52590Q83CTO002769030405Mercedes-Benz C43 AMG

Bosch MED17.7.3.1 original files

The Bosch MED17.7.3.1 unit page